Pavone Probe - Stiffness 3.5 N/m - Tip Radius 10 μm

Probe used with the Pavone Nanoindenter

150

150

Please take notice, that when ordering more than 10 probes in total the average time will be longer than 4 weeks.

Pavone Probe – Stiffness 3.5 N/m – Tip Radius 10 μm
The Optics11 Life probes are pre-calibrated (contact-based method) and reusable force sensors compatible with the Optics11 Life Nanoindenters. The probes are cantilever-based with an optical-fiber interferometric readout and are produced at our headquarters in Amsterdam.

Dependent on the application, the spring constant of the probe can be chosen between 0.025 N/m and 250 N/m which can measure elastic modulus between 10Pa and 1GPa. The unique feature of our probes is the large cantilever bending (up to 20μm) which allows measuring stiffness values spanning 3 orders of magnitude without changing the probe.

Furthermore, spherical (colloidal) glass tips mounted onto the cantilever can be chosen from 3 µm to 250 µm in radius to perform single indentations or indentation mapping at various depths/loads and resolutions.


Disclaimer

Please note that all probes are calibrated after manufacturing. Therefore, the calibrated stiffness and tip sizes may differ from the specified order values. Calibration specifications are: Stiffness = ± 5%, Tip radius = ± 1%.

Stiffness

3.5 N/m

Tip Size

10 μm

Compatible with

Pavone Nanoindenter