Well Plate Probe – Stiffness 3.5 N/m – Tip Radius 3 μm

Probe used with 6-, 12-, 24-, 48-, 96-, 384-Well Plates and other deep dishes

500

Please take notice, that when ordering from 10+ probes in total the average time will be longer than 4 weeks.

Well Plate Probe – Stiffness 3.5 N/m – Tip Radius 3 μm
The Optics11 Life probes are pre-calibrated (contact-based method) and reusable force sensors compatible with the Optics11 Life Nanoindenters. The probes are cantilever-based with an optical-fiber interferometric readout and are produced at our headquarters in Amsterdam.

Dependent on the application, the spring constant of the probe can be chosen between 0.025 N/m and 50 N/m which can measure elastic modulus between 10Pa and 1GPa. The unique feature of our probes is the large cantilever bending (up to 20μm) which allows measuring stiffness values spanning 3 orders of magnitude without changing the probe.

Furthermore, spherical (colloidal) glass tips mounted onto the cantilever can be chosen from 3 µm to 250 µm in radius to perform single indentations or indentation mapping at various depths/loads and resolutions.


Disclaimer

Please note that all probes are calibrated after manufacturing. Therefore, the calibrated stiffness and tip sizes may differ from the specified order values. Calibration specifications are: Stiffness = ± 5%, Tip radius = ± 1%.

Stiffness

3.5 N/m

Tip Size

3 μm

Compatible with

Pavone Nanoindenter

We would like to inform you of upcoming changes concerning probes for Piuma, Chiaro, and Pavone. These changes will be effective as of 1st Feb 2023. Contact support@optics11life.com for more information.